DUMP TRAILER Power UNIT

DUMP TRAILER Power UNIT-DOUBLE ACTING
Basic Description
This power unit has a power up energy down circuit with load holding on both A & B ports. A pressure compensatred flow handle may be added to circuit to manage the decent pace from the cylinder.
Specific Notes
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean the many hydraulic parts concerned just before installation of the power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which ought to also be clean and absolutely free of impurities. N46 hydraulic oil is suggested.
four. The electrical power unit really should be mounted horizontally.
five. Check the oil degree within the tank soon after the first working of the electrical power unit.
six. Oil transforming is required soon after the original a hundred operation hrs, afterwards as soon as each and every 3000 hours.

DUMP TRAILER Energy UNIT- SINGLE ACTING
Common Description
This power unit has a power up gravity down circuit. Start out the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve could be supplied if necessary. Also a pressure compen sated movement control is usually additional towards the circuit to control the descent velocity from the cylinder.
Remark: Please seek the advice of our product sales engineer for that various pump displacement, motor energy or tank capacity.
Distinctive Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned before installation of the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which ought to also be clean and absolutely free of impurities.N46 hydraulic oil is advisable.
4. The energy unit need to be mounted horizontally.
five. Check the oil degree during the tank following the first working with the electrical power unit.
6. Oil altering is needed just after the first a hundred operation hrs, afterwards once just about every 3000 hrs.

Postagens relacionadas

pt_BRPortuguese