1.A connecting website link of an O-ring Chain for basic application is pre-coated with grease on the pins. Prior to connection, verify the grease about the surfaces of pins, and in the event the level of grease is compact, apply grease with bare hands. (If gloves are utilised, the grease is going to be absorbed by the gloves.)
Example: Once the connecting website link (I) of an O-ring chain for general application is
shipped, O-rings are fitted on the roots of the pins. In the event the O-rings come loose because of vibration throughout transport, refit the O-rings in on the roots on the pins.
In this instance, make sure you return the grease collected on the roots with the pins to the central surfaces on the pins, more at portion A than at portions B shown in the above illustration. (Portions A is worn due to sliding with all the bushings.)
2.The chain can be most effortlessly connected within the teeth of the sprocket. Engage the links at each ends of your chain using the sprocket teeth and fit connecting pins. If the sprocket might be moved, the chain may also be linked to the loosened side.
three. Connecting process
1.Verify that O-rings are attached for the roots in the pins.
two.If your volume of grease utilized on the connecting pins is tiny, coat the pins with grease in the central portions.
3.Insert the connecting pins in to the bushings with the inner links at each ends.
four.Verify that the grease is utilized to your complete face of your O-ring, and fit the O-ring onto the connecting pins.
5.Insert the connecting pins to the connecting plate and although pressing the connecting plate, set up the spring clip. Verify no matter whether the head (the end with no split) with the spring clip is turned from the feeding direction of the chain. (See the following illustration.)
six.Make sure you confirm that the spring clip is securely fitted within the clip grooves on the connecting pins.
This completes jointing of your connecting hyperlink. Note that grease on the surfaces of connecting pins and O-rings may be eliminated for the duration of installation function. In this instance, re-grease utilizing the grease within the surface on the base chain or the grease during the polyethylene bag in which the connecting link was contained.