We If you need any information or samples, please contact us and you will have our soon reply.- EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
FL354
FL35-50 series
HOT SALE technical features:
- Direct injection engine, optional domestic 4-cyl diesel engine, which can meet different operation requirements.
- transmission structure with 8F +4R, 8F+8R, 12F+12R
- Gear box, rear axle with matured ept and steady quality.
- New streamlined hood, nice appearance.
- Hydraulic steering, small steering radius, portable and flexible.
- Optional dry or wet air filter, internal or external muffler.
| Main parameters | 35hp | |
| Type | FL354 | |
| Drive type | four-wheel drive | |
| Engine | ||
| Engine Brand | Laidong | |
| Engine Type | 4L23BT | |
| Max. Torque (Nm @ engine rpm) | 124~132/1650 | |
| Fuel tank capacity (L) | 38L+22L=60L 48L+22L=70L | |
| Rating power of engine KW/RPM | 25.7/2350 | |
| Fuel consumption @ nominal power (g/kw.h) | ≤258 | |
| Air Intake Type | Natually-Aspirated | |
| Displacement L | 4/2.156 | |
| Air filter type/size | Oil bath 6.5inch 180m3/h | |
| Torque reserve | 19% | |
| Transmission system | ||
| Clutch type/size | One-piece,dry,double-action/10 inches | |
| No. of gears (F+R) | 8F+4R/8F+8R/12F+12R | |
| Shift method | mechanical sliding sleeve | |
| Max. speed | 30.49 | |
| Gear position | side position | |
| Hydraulic system | ||
| Hydraulic output flow rate (L / MIN) | 38.4 | |
| Hydraulic output valve | One group/Two groups/Three groups/Simple hydraulic output | |
| Hydraulic filter types and capacity | wire mesh/63μm | |
| Wor ept device | ||
| Three-point-linkage | 1 Type/2 Type (Optional) | |
| PTO Speed | 540/760rpm 540/1000rpm(Optional) | |
| Lifting Capacity kn | 9KN | |
| Tillage depth adjustment | Draft, position,position and draft mix control | |
| Parameter | ||
| The whole machine size (dimensions) mm | 3790×1485×2105 3790×1585×2105 | |
| (kg) Min. operation mass | With cab | 2200 |
| Without cab | 2112 | |
| Wheel base (mm) | 1992 | |
| Mini turning Radius (m) | 3.8 | |
| Rated traction force(N) | 10.5 | |
| Deck | Flat Deck | |
| Minimum ground clearance (mm) | 265 | |
| Heat ventilation cab | Optional | |
| Front/rear wheel tread | 1200/1200 1250/1300 (common 1300) | |
| tyre size | 7.50-16/11.2-28 | |
| Bra ept and steering | ||
| Bra ept system | Wet type,disc brake | |
| Steering type | hydraulic steering | |
| Steering Angle (4 x4) | Front axle Max.Steering angle 30°/50° | |
| (options: all these types can Optional for ROPS ,Sunshade,swing drawbar, front/rear ballast,cabin) | ||
Other terms:
1. Delivery: 30 days for normal orders
2. Price: We have price on basis FOB HangZhou and CIF your destination for your choice
3. Payment terms for first order:
—–T/T 30% deposit and balance before shipment
—–100% L/C at sight
ABOUT DEUTZ-FAHR MACHINERY CO.,LTD
DEUTZ-FAHR MACHINERY COMPANY LTD. is a subsidiary company of Italian SAME DEUTZ-FAHR GROUP. We are available to provide customers with a full range of products, including tractors, harvesters. Covered area 45,000 square meters with 700 employees. We adopt Italy SDF group quality control management system and advanced production system. So we can supply high reliability and good performance tractors and harvesters to the farmers from all over the world.
There are over 460 dealers and service channels covering all the market area. We take “satisfy the customers” as our target, provide “3 Full” (Full course, Full time, Full hearted) service.
After-sales service polices:
- FARMLEAD tractor is offered 12 months of warranty period of the tractor, which shall start from the 3 month as the shipment date.
- FARMLEAD will offer free service parts in warranty period, and there is no charge for related work hours and indirect expenses.
- Service training
There are over 460 dealers and service channels covering all the market area. We take “satisfy the customers” as our target, provide “3 Full” (Full course, Full time, Full hearted) service.
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
English 
Spanish 
Portuguese