This standard range of Servo-Worm Reducers are ideal for use in applications that demand high performance, precise positioning and repeatability. They were specifically developed for make use of with state-of-the-art servo engine technology, providing limited integration of the electric motor to the machine. Angular backlash of less than 1 arc-mins is provided standard.
They are available in four sizes (50 mm to 100 mm center range) with input boosts to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide selection of motor couplings and installation flanges are available for assembly to virtually all servo motors, and the hollow bore result can be utilized to mount output shafts, pinion shafts, or other drive elements.
Common applications for these reducers include precision rotary axis drives, traveling gantries & columns, material handling axis drives, zero-backlash axis drives and electronic line shafting. Industries offered include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors have a torque range of 92 Nm to 520 Nm. As angular drives they are especially space-saving and decrease the expenditure for valuable installation space.
The helical-worm servo gearmotors were created in such a way that they guarantee you a low-noise system environment. Moreover, these gearmotors provide you exceptional attenuation properties for the procedure of your systems with low degrees of vibration. This is certainly due to the longitudinal app of drive on the input shaft. This enables torque impulses to end up being prevented effectively and for maximum results when it comes to running smoothness and sound reduction to be achieved.
Both the equipment unit, and the synchronous servomotor are based on our modular program. This allows you to have fully individual configuration options for each application. One thing is certain – Our servo gearmotors are true specialists for very specific requirements.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right angle gearboxes, rate reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement in which a gear in the kind of a screw, also called a worm, meshes with a worm gear. These gears are usually made from bronze and the worms are steel or stainless steel.
While worm gears act like a spur equipment, the worm gearboxes are significantly smaller than other equipment reduction boxes. A main benefit of worm gear reducers is definitely that they produce an output that’s 90° from the insight and can be used to transmit higher torque or decrease rotational speed. Most often, a worm gearbox has right hand threads; to improve the direction of the result, a left-hand thread worm gearbox is necessary.
Sometimes a motor’s capability may be limited to the stage where it requires gearing. As servo producers develop better motors that can muscle applications through more complicated moves and create higher torques and speeds, these motors require gearheads add up to the task.