DC MOTOR PUMP GROUP one
General Description
Consisting of the heavy duty DC motor and the CB1S gear pump, this pump motor group is an great hydraulic power unit for mobile hydraulic equipments, such as vehicle carriers, mobile aerial lifts, and backup systems.
DC MOTOR PUMP GROUP two
Standard Description
This motor pump includes four.5″ DC motor, a CBSR gear pump with built-in relief valve and test valve.
DC MOTOR PUMP GROUP 3
Basic Description
This motor pump includes a 4.5″ DC motor plus a CBSR gear pump which has a normal electrical power up/gravity down circuit which has a relief valve, a check out valve along with a solenoid release valve.
Specific Notes
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic elements concerned in advance of mounting the power unit.
3. Viscosity with the hydraulic oil shoud be 15~68 cst, which should really also be clean and free of charge of impurities. N46 hydraulic oil is advised.
four. The power unit needs to be mounted horizontally.
five. The relief valve pressure is preset about 25% increased than the working pressure.
six. Flow management valve for lowing velocity adjustment is available unpon request.
