Materials Handling Electrical power UNIT two
General Description
This electrical power unit attributes energy up gravity down circuit. Activate the start off solenoid to start out the motor to lift the machine. The lowing movement is activated by the solenoid valve with all the lowering velocity controlled through the strain compensated flow manage valve. Goods of this series is often broadly utilized in the marketplace of logistic products for example fork lift, mini lift table, and so on.
Specific Notes
1. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean every one of the hydraulic elements concerned ahead of mounting the power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst,which should really also be clean and no cost of impurities, N46 hydraulic oil is advisable .
4. Oil transforming is needed just after the initial a hundred operation hrs,afterwards when each 3000 hrs.
5. The energy unit really should be mounted horizontally.

Material Managing Energy UNIT one
General Description
This electrical power unit is intended to the fork lift field, consisting of really effective gear pump, DC motor, guide raise and reduce valve, tank, ect. The up and down movement are managed from the lever of your manual release valve, that is outfitted with an electrical switch to activate the motor. The lowing pace is controlled from the strain compensated flow handle valve.
Particular Notes
1. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean all the hydraulic components concerned in advance of set up of the electrical power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which need to also be clean and no cost of impurities, N46 hydraulic oil is recommended .
4. Oil transforming is required immediately after the first 100 operation hrs, afterwards the moment each 3000 hrs.
five. The power unit shown is built to be mounted horizontally.