For Use in Circumstances Exposed to Water or Sea Water Drops
When chains are exposed to rainwater or sea water drops, decreasing of power and brittleness by corrosion, sudden dress in, bending failure by rusting and roller rotation failure and so forth. arise. In this kind of cases, depending on the circumstance, stainless steel or high guard chains or chains with stainless steel parts are suggested. The large guard chains are hugely rated by our shoppers. For employing chains under water, see the following “For In-water Use”.
For In-water Use
When utilizing chains in water or sea water, brittle fracture and corrosion needs to be taken into consideration as well as the adverse problems stated during the over area. For this function, we manufacture Water Treatment method Conveyor Chains which includes Traveling Water Display Transfer Chain, Rake Chain, Sewage Treatment Chain, BT Bushing Chain for Water Treatment Drive Unit. Chains with stainless steel elements, with specially coated plates or stainless steel chains are proposed. Furthermore, as corrosion resistant bearings which might be used in-water, stainless steel, Diesten and Diemec bearings can be found.
For Use in Acidic or Alkali Environments
In acidic or alkali environments, stress corrosion, hydrogen embrittlement, intergranular corrosion, and so on. are brought about along with prevalent troubles encountered in other corrosive environments. Part “5-4 Corrosion Resistance Towards Various Substances” lists the corrosion resistance of chain elements to many substances.
Particularly, parts made of 13Cr stainless steel may possibly rust dependent 
on disorders.
Lubrication
Chain daily life is extended by periodical lubrication. Lubrication also reduces the essential energy. However, note that, under some support disorders, lubrication might adversely have an effect on the chain, or be regulated by law, etc.
?Lubrication intervals
It can be a basic rule to lubricate about after every week, but based on the problems for the duration of operation plus the state of lubricating oil, lubricate as needed.
As lubrication approaches, coating or drip lubrication is advisable. As for that spots of lubrication, see the next illustration.
For powerful lubrication, clean the chain before lubrication. Pick a lubrication technique suitable for that distinct service ailment.
?Automated lubrication (oiling) gadget
We have several automated lubrication (oiling) units. Seek advice from us if you are utilizing chains inside a setup where lubrication is challenging or for those who program to automate lubrication.
When Lubrication Will not be Possible
Lubrication is certainly important for extending the existence of your chain. Having said that, below some conditions, lubrication may not be sensible.
Steer clear of lubrication while in the following scenarios:
one) The chain is embedded within the loads (granular material, powder, and so on.).
two) Granular materials and powder deposit on the chain when carried by pan or apron conveyors. Here, lubrication works adversely.
3) The chain temperature turns into large.
4） Problems in which lubrication is prohibited by regulations or laws.
When the chain cannot be lubricated or is being used to convey foods, we propose working with our resin, oilless or stainless steel bearings.
For Use with Meals
When applying chains for driving or conveying inside a foods processing machine, especially when the foods straight contacts the chain, stainless steel is needed by FDA laws.
Stainless steel chains (S3) made of 18-8 stainless steel are recommended. We also manufacture chains with neat visual appeal that give a clean impression created particularly for use with foods goods. Make contact with us for more information.
